Front One Way vs Center One Way

Hey guys,

I'm looking to get a front one way for my TT01D. What wud u recommend though?
This is the part I wanna get:
http://www.rcmart.com/catalog/rc-tt01-3racing-alumfront-tube-tt0126lb-p-25159.html?cPath=595_744_708
Is that all I need?

im not familiar with the COW but the FOW i know and i have it installed in my 03f. to long to explain the benefits of FOW but i think its preferred by most rc drifters worldwide. :cheers:

mmmhhh... i think i ask the same question before...
Josh knows that..i think they are the same purpose you only need one of them..

Thanks Guys.
So is this one the right thing?
http://www.rcmart.com/catalog/rc-tt01-3racing-alumfront-tube-tt0126lb-p-25159.html?cPath=595_744_708

yup thats the rifgt one! almost all drifters here with tt01 chassis have that

cool, gna get it.

im not sure if your gonna need universal joints for the 3racing FOW..

but with this one you wont.. your stock dogbones will fit perfectly..
http://www.rcmart.com/catalog/rc-tt01-tamiya-front-oneway-unit-53671-p-7197.html

it al depends on you personal preferences.. im fine with my evo on FOW and rear spoll.. same as tim's pro-d with his COW and rear spool.

up to you man

yup thats right.. mine are same FOW and Spool... and dogbones fit perfectly.. no problems hehehe..

Q also, will this fit he TAMIYA FOW??
http://www.rcmart.com/catalog/rc-tt01-yeah-racing-steelalum-universal-shaft-tamiya-tt01e-tt015v2bu-p-25583.html?cPath=595_744_1223

please advice...

if you're gonna get an FOW, i suggest taking the one from tamiya..
it fits perfectly.. i'm not sure about the other brands that makes FOW for tamiya as well..

is there anybody using an FOW from other brands aside from tamiya?
please share some inputs..

altimeters wrote:

im not sure if your gonna need universal joints for the 3racing FOW..

but with this one you wont.. your stock dogbones will fit perfectly..
http://www.rcmart.com/catalog/rc-tt01-tamiya-front-oneway-unit-53671-p-7197.html

it al depends on you personal preferences.. im fine with my evo on FOW and rear spoll.. same as tim's pro-d with his COW and rear spool.

up to you man

this is the one..

JRacing wrote:

yup thats right.. mine are same FOW and Spool... and dogbones fit perfectly.. no problems hehehe..

Q also, will this fit he TAMIYA FOW??
http://www.rcmart.com/catalog/rc-tt01-yeah-racing-steelalum-universal-shaft-tamiya-tt01e-tt015v2bu-p-25583.html?cPath=595_744_1223

please advice...

i think your gonna need universal cupjoints for those if your gonna use it for your FOW.. ive tried it before with the universal shaft i sold you.. stock cup joints that came with the FOW is just too big.. its for dogbones only.

research more to be sure

Sir Ashy,

FOW and COW serve the same purpose. And that is to make tighter turns and (of course ) the e-brake effect. =)

Lots of co-drifters back in the Philippines have been suggesting to go for the COW.
Why? They say that the COW is more controllable and does not leave you in spin-outs.
This being said, i would think it would be correct to say that the FOW gives more of the e-brake effect.
Spin-outs are not a bad thing, you just have to use it to your advantage.
That why we have to learn how to counter steer after giving the brake a small smack. =)

My opinion: Depends on your driving preference. =)

HTH sir. +D

you might also wanna check this one out..
center one-way for tt01.

see here

altimeters wrote:

im not sure if your gonna need universal joints for the 3racing FOW..

but with this one you wont.. your stock dogbones will fit perfectly..
http://www.rcmart.com/catalog/rc-tt01-tamiya-front-oneway-unit-53671-p-7197.html

it al depends on you personal preferences.. im fine with my evo on FOW and rear spoll.. same as tim's pro-d with his COW and rear spool.

up to you man

Cool, this one seems like a good buy. Thanks for all the replies dudes

i prefer having a FOW, why? gives your car fast transitions during switch backs, I have a center one way shaft from topcad and it was a mistake! when i e-brake, it spin with no reason. folks, just a reminder when you put a news parts in kits, i'm sure the handling will change drastically. so first, try feel to your car's capabilities. then you adjust. :bom:

+1
Learn your kit first before upgrading.
It all depends on how you control your kit.

ya, tried out streetsweepers one yesterday. It's a little hard to control at first and harder to do linking drifts.
I need some practice with it though.

then you could also try the ones with the COW..
tims pro-d and recks ta04 are both running on it

cool, next time.

Doesn't it depend on the kit? =/
I think sir Ashyy needs to try a TT01 with a COW installed.

ya good idea. that would be a closer comparison

so whose got one lol
atleast he could feel how it works

got tamiya fow dif installed on my kit...big difference!
Using only stock dogbone coz the tamiya universal joint would not fit..installed it anyway on my rear.

yup i think all the guys here on tt01's got FOW..
ashyys looking for tt01's with COW and see the diff between the two.

whos gonna get one first..
i think its available at josh's friend

I've already ordered the FOW in batch 3. LOL.
I think that will work fine. Just have to get used to that setup.