MST FXX-D VIP RWD Chassis Setup on Aphalt Rebuild RC Drift

Let me share my fxx-d rebuild and big thanks to the guys who help me on this build
Rommel, Glob, Elmer, and Dom.

*Please note that descriptions below are before the images.

Chassis: MST FXX-D vip red

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Lets start with the electronics
Motor: Tekin Gen 2 13.5

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

With a 18t 48p pinion

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST Aluminum 3wires clamp with 12Awg Japan Red cable wire

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Esc: Sanwa Vortex Type-d

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Reciever: Sanwa RX_472

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Servo: OMG LP-BF07S

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Gyro: Sanwa SGS-01D Drift Version

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Suspension Front:
Mst stock damper with stock hard springs and 400wt shock oil

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Suspension Rear:
DS Racing Bagi Suspension
with super soft spring and tamiya 200wt shock oil

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Weights:
Wrap Up Next
2pcs 5gms 1pc 10gms lower arm rear left
2pcs 5gms 1pc 10gms lower arm rear right

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST 10gms on new mst diffuser

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

i also replace the stock small and big bevel gear inside the gearbox to 40-16 ratio

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Ride Height:
Front height is 6mm

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Rear Height is 4mm

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Wheel and Tires:
Front Tires MST FR-F Hard

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Rear Tires Ds Racing F-Zero

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Wheels are Yokomo 12mm and sometime Speedway Pal Panasport 10mm offset with Wrap Up Next Nuts

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Additional Accessories Overdose Ballcap End

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Now lets go for the tuning stage that works for me
In front i used a 36 degree of Caster

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

And a 14 degree camber

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

i make the steering linkage a bit short to have a bigger full lock and faster switchback

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Cons here are that you will have a ridiculous toe out, that will make you very slow at start and straight line, anyhow who run straight on drift? we love sideways don't we? so big toe out doesn't bother me at all

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

now lets go to rear not that much change i just did a 5 camber at rear to fit on my body shells

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

and lastly my TX
Sanwa M12 i love this tx which give me easy time to adjust my esc settings thru aux mode by the way even the gyro aggressiveness or vice versa

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

Thanks for reading and hope it help other drifters too \m/

sandbox drifts

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr

MST FXX-D VIP RWD Chassis by sandbox toys, on Flickr